海绵/泡沫拉伸撕裂强度试验机
Sponge / foam tensile strength testing machine
产品名称:海绵泡沫拉伸撕裂强度试验机
Product Name: sponge foam tensile strength testing machine
显示方式:液晶显示
Display mode: liquid crystal display
产品型号:PMLS-1000
Product type: PMLS-1000
制造标准:
Manufacturing standards:
(GB/T6344-2008)软质泡沫聚合材料 拉伸强度和断裂伸长率的测定
(GB/T6344-2008) determination of soft foam polymeric material tensile strength and elongation at break
(GB/T10808-2006)高聚物多孔弹性材①料撕裂强度的测定
(GB/T10808-2006) determination of tear strength of polymer porous elastic material
(ISO 1798-1997)柔性泡沫聚合材料,拉力强度和断裂时延伸率的测定测试方法
(ISO 1798-1997) flexible cellular polymeric materials, determination of tensile strength and elongation at fracture test method
一、 产品性能特点:
A, product properties:
适用于测定软质海绵泡沫聚合物材料的拉⌒ 伸强度、断裂伸长率、海绵泡沫塑料材料撕裂性能的测试。
Applicable to the determination of the soft sponge foam polymer material tensile strength, elongation at break, sponge foam material tear test.
海绵/泡沫拉伸强度试验机设计融汇、吸收了国外的ω 先进试验设备的控制技术及外形设计,本机外形美观、操作方便、性能稳定可靠。该机采用全数字调速电机及全数字调速系统作为驱动装置,经圆弧同步带及圆弧同步带轮减速系统减速后带动精密丝杠副加载.
Sponge, foam / design integrates tensile strength testing machine absorbed the advanced test equipment and control technology and the appearance of foreign design, the machine has the advantages of beautiful appearance, convenient operation, stable and reliable performance. This machine adopts full digital speed regulating motor and the full digital servo system as the drive equipment, the arc belt and arc synchronous belt wheel deceleration system reducer drives the ball screw loading
本仪器由液晶中文操作,具◆有调整范围宽、使用操▽作方便、性能稳定、数据精度高等优点
The instrument is composed of liquid crystal Chinese operation, with wide tuning range, convenient operation, stable performance, data precision
海绵拉伸撕裂强度试验机
二、主要技术指标:
Two, the main technical indexes:
01、最大试验力:单柱结构:0-1000N
01, the maximum test force: single column structure: 0-1000N
02、试验力显示范围: 0~1000N
02, the test force display range: 0 ~ 1000N
03、试验力分档:全程不分档
03, the test force stepping: full unclassified
04、试验力测量精度:优于示值的±1%
04, the test force measurement accuracy: better than showing the value of ± 1%
05、位移分辨率:0.01mm
05, the displacement resolution: 0.01mm
06、位移测量准确度:优于示值的±1%
06, the displacement measurement accuracy: better than showing the value of ± 1%
07、横梁移动速度控制︾范围:0.05mm/min~300mm/min
07, beam speed control range: 0.05mm/min ~ 300mm/min
08、位移速度控制精度:优于±1%
08, the displacement velocity control accuracy is better than ± 1%
09、拉伸行程:0~800mm(不含夹具)
09, the tensile range: 0 ~ 800mm (not including the fixture)
10、外形尺寸(长×宽×高): 435mm×275mm×1700mm(单柱)
10, size (length * width * height): 435mm * 275mm * 1700mm (Dan Zhu)
11、供电电源:220V、50Hz
11, power: 220V, 50Hz
三、设备配置:
Three, equipment configuration:
01、高强度主机一台(单臂式结构)
01, high strength and a host (single arm type structure)
02、高精度光电编码器一支
02, a high precision photoelectric encoder
03、全数字调速系统和全数字调速电机各一套
03, the full digital speed control system and the full digital speed regulating motor a
04、精密丝杠副一套
04, a set of precision screw
05、精密圆弧同步减速系统一套
05, precise arc synchronous reduction system
06、高精度传感器一支
06, a high precision sensor
07、专用拉伸辅卐具一套
07, a set of special tensile
08、万能试验机控制系统及大液晶显示器一套
08, universal testing machine control system and large liquid crystal display a
四、功能介绍:
Four, function introduction:
01、速度瞬间切换:试验过程中可按预先设定的三※个速度瞬间切换,以节约试验时间
01, speed instantly switch: test process according to the preset three speed instantly switch, to save the test time
02、自动停机:试样破坏后,移动横梁自动停止移动
02, automatic shutdown: sample after failure, automatic stop moving moving beam
03、显示方式:试验过程动态实时显示试验力、位移量、试验速度、峰值、试验状态、试验曲线等同时实时在同一液晶屏幕上显示
03, the display mode: test process dynamic real-time display test force, displacement, test speed, peak, test, test curve is also displayed on the same screen
04、自动返回:试验完成后试验机移动▂横梁自动返回到试验初始位置
04, automatic return: after completion of the test test machine moving beam automatically return to the initial position
05、限位保护:具有程控和机械两级限ㄨ位保护功能
05, limit protection: a programmable and machinery two limit protection function
06、过载保护:当负荷超过额定值的3~5%时设备自动停止工作
06, overload protection: when the load exceeds the rated value of 3 ~ 5% when the equipment stops working automatically
07、自动打印:配制微型打印机,可对测试的数据进行打印
07, automatic printing: the preparation of micro printer, print the test data
海绵泡沫系列检测仪器产品列表
Sponge foam testing instrument product list
海绵拉伸强度测定仪
Sponge tensile strength tester
海绵落球回弹仪
Sponge ball rebound tester
海绵密度测定仪
The sponge density measuring instrument
海绵泡沫压陷硬度测定仪
Sponge foam indentation hardness tester
海绵硬度计
Sponge hardness
海绵切割∩机/切割台
The sponge cutting machine and cutting machine
海绵燃烧性能试验机
Sponge combustion performance testing machine
海绵往复冲◥击疲劳试验机
Sponge reciprocating impact fatigue testing machine
海绵吸水率测定仪
Sponge bibulous rate tester
海绵压缩永久变形
Compression permanent deformation of sponge
硬质海绵泡沫试验机
Rigid foam sponge machine test
(1)硬质泡沫塑料弯曲试验机
(1) rigid foam bending test machine
(2)硬质泡沫塑料吸水率测定仪
(2) determination instrument hard foamed plastics absorption rate
(3)硬质泡沫塑料易碎性能试验机
(3) foam fragile hard machine performance test
海绵拉伸撕裂强度试验机