手动冲片机
CPJ-25冲片机
CPJ-25 punching machine
手动冲片机
Manual punching machine
一、主要▲技术参数
One, the main technical parameters
有效行程：250MM
The effective stroke: 250MM
最大切断参数：200mm
The maximum cutting parameter: 200mm
最大切断厚度：2mm
The maximum cutting thickness: 2mm
二、结构性能：手动制样，采用不同的成型刀具，可制造出多种不同形状的非〗金属材料●标准样条。
Two, structure performance: manual sample preparation, the molding tool of different, can produce non metallic materials standard spline in various shapes.
三、适用范围：适用于各种不同性能，不同材料，不同形状的∮软片，薄膜等标准非标准式样。
Three, the scope of application: applicable to a variety of different performance, different materials, different shapes of film, film and other standard and non-standard style.
四、符合标准：GB/T1043 GB/T1040 GB/T1843 ISO8004.2
Four, meet the standards: GB/T1043 GB/T1040 GB/T1843 ISO8004.2
五、刀具型号与规格：
Five, the tool type and specification:
I型(哑铃型)总长 L=120mm
Making making I type (dumbbell) of making making making making making making L=120mm
端部宽度 b=25±0.5mm
Making making making making making making making making making making end width of making making making making b=25 ± 0.5mm
标距 Lο=40mm
Making making making making making making making making making making making gauge making making making making making making L 0 =40mm
Ⅱ型(哑铃型)总长 L=115mm
Making making type II (dumbbell) of making making making making making L=115mm
端部宽度 b=25±1mm
Making making making making making making making making making making making end width of making making making making b=25 ± 1mm
标距 Lο=25mm
Making making making making making making making making making making making making gauge making making making making making making L 0 =25mm
Ⅲ型(哑铃型)总长 L=150mm
Making making type III (dumbbell) is making making making making making L=150mm
端部宽度 b=10±0.5mm
Making making making making making making making making making making end width of making making making making b=10 ± 0.5mm
标距 Lο=50mm
Making making making making making making making making making making making gauge making making making making making making L 0 =50mm
Ⅳ型(哑铃型)总长 L=不小于150mm
Making making type IV (dumbbell) is making making making making making L= not less than 150mm
端部宽度 b=10-25mm
Making making making making making making making making making making end width of making making making making b=10-25mm
标距 Lο=50mm
Making making making making making making making making making making making making gauge making making making making making L 0 =50mm
制样机系列产︼品
Preparation machine series products
冲片机
Punching machine
万能制样】机
Universal system prototype
哑〓铃型制样机
Dumbbell system prototype
缺口制样√机
Gap system prototype
