CLC—300型落锤式冲击试验机
The testing machine CLC - 300 type drop hammer
符合标准：
Meet the standard:
GB/T11548 GB/T10002 GB/T13664 GB/T16800 GB/T14152 GB/14153 ISO04422
GB/T11548 GB/T10002 GB/T13664 GB/T16800 GB/T14152 GB/14153 ISO04422
一、应用范围：
One, the scope of application:
CLC—300型落锤式冲击试验机适用于◎对塑料、玻璃、陶瓷等非金属材料试样或制品进行冲击试验，是用以评价材料抗冲击性能的一种测试仪器。同时，也可以对↙同种材料、同种规格的试样进行冲击对比试验，以鉴定材料质量的优劣。对通过法和梯度法两种试验方法均适用。
The testing machine CLC - 300 type drop hammer is suitable for impact tests on plastic, glass, ceramics and other non metal material samples or product, is used for a test instrument impact performance assessment of materials. At the same time, can also sample of the same material, the same specifications for impact tests, to identify the material quality. Apply both the method and gradient method two test method.
落锤式冲击试验机
二、主要技术参数及规格：
Two, the main technical parameters and specifications:
1、使用温度：10—35℃
1, the use of temperature: 10 ℃ - 35 ℃
2、附近无▽大的振源，无强的电磁场。
2, the near absence of large source, no strong electromagnetic field.
3、环境中无腐蚀性〖介质，并注意做到电控箱通风良好。
Non corrosive media 3, environment, and pay attention to the electric control box with good ventilation.
4、电源：交流220V±10% 2A
4, power: AC 220V ± 10% 2A
5、锤体质量：0.250—15.000kg
5, hammer weight: 0.250 - 15.000kg
6、工作台行程：0—400mm
6, XXY: 0 - 400mm
7、试样直径：φ10—φ400mm(可扩展)
7, the sample diameter: diameter 10 - φ 400mm (extensible
8、锤头半径：R5mm R10mm R30mm R50mm(D25、D90)可选
8, hammer radius: R5mm R10mm R30mm R50mm (D25, D90) optional
9、zui大冲击高度：2000mm
9, the biggest impact height: 2000mm
10、高度定位误差：±2mm
10, height positioning error: ± 2mm
11、外形尺寸：主机(长×宽×高)700mm×700mm×3300mm
11, size: host (length * width * height) 700mm * 700mm * 3300mm
12、整机重量：约450kg
12, the weight: About 450kg
落锤式冲击试验机
三、本机特点：
Three, the machine features:
本试验机采用单片机控制技术，利用计算机的智能，可预置冲击高度，自动防止二次冲击，自动提锤々到预定高度，并随时〓显示高度。该机可靠性好、精度高，符合专↓业标准GB6112-85落锤式冲击试验机技术条件标准的要求。
This machine adopts single chip microcomputer control technology, using computer intelligence, preset impact height, automatically prevent the two impact, automatic lifting hammer to a predetermined height, and ready to show height. This machine has good reliability, high precision, meet the standards of professional standard GB6112-85 drop weight impact testing machine requirements specification.
四、主要配置：
Four, the main configuration:
1、主机 1台
1, 1 computers
2、电控箱 1台
2, electric control box 1
3、附件箱 1个
Annex 3, box 1
五.力学冲击试验机系列产品
Five mechanical impact testing machine series products.
薄膜冲击试验机-机械/微机控制/液晶显示
Film impact testing machine mechanical / microcomputer control / liquid crystal display
简支梁冲击试验机-触摸屏/微机控制/指针式
Charpy impact testing machine - touch screen / microcomputer control / pointer
简支梁悬臂梁组合式冲击试验机
Simply supported cantilever beam combined impact testing machine
落◥锤冲击试验机
Drop weight impact testing machine
落球冲击试验机
Falling ball impact test machine
落镖冲击试验机
Falling dart impact tester
