触摸屏控制-高压漏电起痕试验仪
高压漏电起痕试验仪
Touch screen control - pressure tracking test apparatus - Manual boost
（NLD-AI型）
(type NLD-AI)
满足标准：
Meet the standard:
GB/T6553-2003 及 IEC60581：1984
GB/T6553-2003 and IEC60581:1984
《评定在严酷环境条件下使用的电气绝缘材料耐电痕化和蚀损的试验方法》
"Test method for evaluation of electrical use in harsh environmental conditions of the resistance to tracking and erosion of insulation materials"
高压漏电起痕试验仪
产品概述：
Product overview:
高电压起痕试验仪适用于对电工电子产品、家用电器及其材料进行耐电痕化和蚀损的试验，模拟在工频（48Hz - 62Hz）下，用液◇体污染物和斜面试样，通过耐电痕化和蚀损的测量评定在严酷环境条件下使用的电气绝缘材料的耐电痕化和蚀损等级。
High voltage tracking test instrument for test on Electrical and electronic products, household appliances and material resistance to tracking and erosion, simulation in frequency (48Hz - 62Hz), using liquid contaminants and inclined plane specimen, the resistance to tracking and erosion of level measurement and resistance to tracking and erosion evaluation electrical use in harsh environmental conditions of insulating material.
产品特点：
Product features:
本仪器支持5路试样同时进行试验，每路都有独立的控制系统进行控制
The instrument support 5 specimens tested at the same time, each has an independent control system control
本仪器核心控制系统由西门子PLC控制，通过光电隔离方式进行采ω集电压和电流，有效解决抗干扰问题使数据采集保持稳定
This instrument is the core control system controlled by Siemens PLC, collecting voltage and current with photoelectric isolation, effectively solve the problem of interference data collection can be kept stable
本仪器显示部分是9寸触摸屏，操作方便，数据显示直观，能够实时显示每个试样的泄露电流
The display part is a 9 Inch Touch screen, convenient operation, visual data display, can display the leakage current of each specimen
可以自由设定泄露电流数值，当实验中的电流超过设定电流值时，能够提示报警，并切断高压电源，并不影响其它试样继续做试验
You can freely set the leakage current value, when the current experiment than the set current value, can alarm, and cut off the high voltage power supply, does not affect the other specimen continue to perform the experiment
滴液流量大小可根据实际需求自由设定
The droplet flow size can be set freely according to the actual demand
通过手动旋钮顺时针调到指定试验电压。
Clockwise to the specified test voltage through a manual knob.
可以手动自由设定试∩验时间
You can manually set the time of test
本仪器具有排风和照ω 明功能
The instrument has the function of ventilation and lighting
技术参数：
Technical parameters:
1、供电电源：220V
1, power: 220V
2、电源功率：5KVA
2, power: 5KVA
3、试验电压：100V-6000V AC
3, the test voltage: 100V-6000V AC
4、试验电压压降：≤5%
4, the test voltage drop: ≤ 5%
5、时间设定：可自由设定
5, time setting: can be set freely
6、电极间距：（50±0.5）mm
6, the electrode spacing: (50 ± 0.5) mm
7、电极材料：不锈钢
7, the electrode material: stainless steel
8、试样数量：5个
8, the number of samples: 5
9、滴液大小：可根据需求自由设定
9, droplet size: according to the demand set free
10、短路要求：短路电流≥60mA 持续 2S
Requirements: 10, short-circuit short-circuit current is greater than or equal to 60mA for 2S
11、滴液时间间隔：可根据需求自由设定
11, dropping time interval: according to the demand set free
12、 滤纸尺寸： 按照标准尺寸要求制做，滤纸厚度▅为 0.15 -0.17mm；
12, the filter size: make according to standard size requirements, filter thickness is 0.15 -0.17mm;
13、 箱体◆内容积：≥ 0.75立方米，带玻璃观察门（可根据要求定做）
13, the box body volume: 0.75 cubic meters, observe the door with glass (can be customized according to requirements)
高压漏电起痕试验仪
设备配置：
Device configuration:
主机一台
Host a
变压器1台
Transformer 1
调压器1台
Pressure regulator 1
高压电阻1K?-5个
High pressure resistance 1K -5
高压电阻10 K? -5个
High pressure resistance of 10 K -5
高压电阻22 K? -5个
High pressure resistance of 22 K -5
高压电阻33 K? -5个
High pressure resistance of 33 K -5
9寸触摸屏1个
9 Inch Touch screen 1
精密滴液装置1套
1 sets of precision dropping device
标准电极一套
A set of standard electrode
控制系统一套
A set of control system
高压切断装置5套
High pressure cutting device 5 sets
电压采集装置：1套
The voltage acquisition device: 1 sets
电流采集装置：5套
Current collecting device: 5 sets
排风扇1个
The fan 1
照明灯1个
Lighting 1
电性能专业检测试验机列表
The electrical properties of professional testing machine
电压击穿】试验仪（10-150KV）
Voltage breakdown tester (10-150KV)
漏电起痕试验仪
Tracking test apparatus
介电常数及介质损耗测试仪-高频/工频
The dielectric constant and dielectric loss tester - high frequency / frequency
耐电弧测试仪-微机控制/触摸屏
Arc resistance tester - microcomputer control / touch screen
电阻率测定仪
Resistivity tester
高压漏电起痕试验仪
