随机附件standard accessories
1. 固定顶尖dead centers
2. 内六↓角扳手 allen wrench
3. 呆扳手 single open end wrench
4. 挂轮change gear
5. 钻夹头 drill chuck
6. 钻夹头锥柄drill chuck arbor
特殊附件special accessories
1. 组合车刀 turning tool set 2. 平口钳machine vice
主要尺寸
A、主要『技术参数〖technical parameters AT125
B、床身上最大工件回转直径 (mm)Max turning diameter over bed 125
C、最大工件长度 (mm)Max.length of work piece 180
D、刀架上最大工件回转直径(mm)Max turning diameter over tool carrier 60
E、主轴通孔(mm)Spindle bore 9
F、公制螺纹■种类metric thread kinds on processing 10
G、公制螺距范围metric thread pitch on processing 0.25-1
H、英制螺纹ㄨ种类(mm/min)inch thread kinds on processing 10
I、英制螺距范围inch thread pitch on processing 22-64 1/n
J、每转刀架的纵向进给∏量longitudinal feed on spindle tool carrier 0.07-0.14
K、尾架套筒最大移动量Max. Stroke on taper hole 18
L、主轴转数级◤数Spindle speed step 5
M、主轴转数范】围 Spindle speed scope 560-2500
N、最大钻孔直∩径 Max.drilling capacity 6
O、主轴端面至工作台面距离distance from bench to spindle nose 120-180
P、主轴中心线至立柱表@ 面距离distance between spindle center and the surface of column 125
Q、钻铣头箱绕立柱回转角度swivel-angle of headstock around the column 360
R、主轴转◆速级数spindle speed step 10
S、主轴转数范围spindle speed scope 500-2500
T、工作台面尺寸bench dimension 85*60
U、主□ 轴套筒移动量stroke on spindle hole 40