数字储存示波器 DS-1000系列产☆品规格及特性
|
Acquisition |
|
|
Mode |
Real-time sampling, Equivalent sampling, Roll mode, Average, Envelope |
|
Input |
|
|
Input Coupling |
AC, DC, GND |
|
Input Impedance |
1MΩ±1% // 21pF±5% |
|
Max. Input Voltage |
42Vpk (DC + AC peak) |
|
Vertical |
|
|
Channel |
2 (DS-1202 allows to stack up to max. 6 channels.) |
|
Vertical Resolution |
9 bits /channel @ 5mV/DIV- 10V/DIV (8 bits @ 2mV/DIV) |
|
Sensitivity |
2mV/DIV to 10V/DIV (as 2-5-10 step) |
|
Bandwidth |
DS-1102, DS-1202: DC to 200MHz |
|
BW Limit |
Approx. 20MHz |
|
Range |
8 divisions |
|
Offset Level |
±4 divisions |
|
Offset Increments |
0.1 division |
|
DC accuracy |
±3% |
|
Time Base |
|
|
Sampling Rate |
DS-1102, DS-1202:Real-time sampling: 200MS/s @ 1Ch, 100MS/s @2Ch (Single Shot |
|
TimeBaseRange |
2ns/DIV to 10s/DIV (as 2- 5-10 step) |
|
Accuracy |
100ppm |
|
Range |
10 Divisions |
|
Pre/Post Trigger |
+/-64k points |
|
Time Resolution |
200ps |
|
Record Length |
DS-1002, DS-1102:2k points/channel to 64k points/channel |
|
Trigger |
|
|
Type |
Rising, Falling, Delay-Trigger, TV-Trigger (DS-1002 no TV Trigger) |
|
Mode |
Auto, Normal and Single (with RUN/STOP hardware button on the DSO device) |
|
Source |
CH1, CH2, Ext-Trig |
|
Coupling |
DC, HF rejection |
|
Sensitivity |
5mV/DIV to 10V/DIV = 1div, 2mV/DIV = 1.5div |
|
Trigger Level |
±4 divisions |
|
Trigger Increments |
0.1 division |
|
Measurement and Processing |
|
|
Special function |
Autoset, Monitor from Internet (TCP/IP) |
|
Measurement |
Vp-p, Vmax, Vmin, Vamp, Vtop, Vbase, Vupper, Vmiddle, Vlower, Vmean, Vrms, Positive overshoot, Negative overshoot, Period, Frequency, Pulse width |
|
Cursor |
Time difference, Voltage difference |
|
Math |
Add, Sub, Multiplication, Division |
|
FFT |
Rectangular (Vertical scale: dbV RMS, Linear RMS) |
|
Export Data |
WORD, EXCEL, CSV, TEXT, HTML, Clipboard, Hardcopy, Preview |
|
Trigger Input/Output |
|
|
EXT-TRIG Input Limitation |
TTL Level |
|
EXT-TRIG Acknowledge Level |
1.6V to 5V, rising/falling edge |
|
EXT-TRIG Acknowledge Freq. |
“>10ns” and “>0.1 TIME/DIV” |
|
TRIG-OUT |
3.3v pulse, 20ns delay after trigger occurring (only for DS-1202 stack function) |
|
Calibration Output |
|
|
Level |
Approx. 3.3V |
|
Frequency |
1kHz ±0.5% |
|
Environment |
|
|
Operation |
0℃ to +50℃ |
|
Storage |
-10℃ to +60℃ |
|
Physical |
|
|
Interface |
USB2.0 (USB1.1 compatible) |
|
Power |
USB bus power |
|
Dimension (device only) |
135/80/26 mm3 |
|
Weight (device only) |
230 g |
|
Accessories |
|
|
Probes |
DS-1102, DS-1202:250MHz probe (1x/10x) x2 |
|
Others |
Installation CD, USB2.0 cable, User manual, Soft case |
数字储存示波器 DS-1202 串接功能限制
|
Acquisition |
|
|
Mode |
Real-time sampling, Average, Envelope . |
|
Time Base |
|
|
Sampling Rate |
Real-time sampling: 200MS/s @ 1Ch/DSO, 100MS/s @ 2Ch/DSO |
|
TimeBaseRange |
2ns/DIV to 100ms/DIV (as 2- 5-10 step) for Master and Slave DSOs |
|
Trigger |
|
|
Source |
CH1, CH2, Ext-Trig in Master-DSO (NA for Slave-DSO) |
|
Jitter |
+/- 200ps in Master-DSO; +/-10ns in Slave-DSO |
数字储存示波器 DS-1000系列安装环境
|
.1 |
INTEL Pentium 300M CPU or compatible PC (2G recommended) |
|
.2 |
One USB port (USB2.0 recommended) |
|
.3 |
Windows 98/ME/2000/XP operating system |
|
.4 |
128M bytes memory (512M recommended) |
|
.5 |
Disk space more than 10M bytes |
|
.6 |
One CD-ROM drive for installation |
|
.7 |
640x480 VGA or higher (1280x1024 recommended) |
|
.8 |
101-Keys keyboard |
|
.9 |
Mouse (with wheel recommended) |
数字储存示波器 DS-1000系列产品∏配备
|
项目 |
DS-1002/DS-1102 |
DS-1202 |
|
|
1. |
DSO主机 |
1 |
|
|
2. |
250MHz 讯号探针 (with 1x/10x switch) |
2* |
|
|
3. |
探针配件包 |
2 |
|
|
4. |
串接讯号线 |
0 |
1 |
|
5. |
USB2.0 A-B 传输线 (1.8m) |
1 |
|
|
6. |
安装光盘 |
1 |
|
|
7. |
使用手册 |
1 |
|
|
8. |
DSO 皮套 |
1 |
|
|
1. |
2. |
3. |
4. |
5. |
6. |
|
|
|
|
|
|
|
