应用领域：RoHS、卤素环保指令检测
镀层厚度测试
合金分析（铜合金不锈钢等）
产品特点：
ProductFeatures
1. 采用美国原装电致冷高性能Si-PIN探测器，分辨率高，探测范围宽,涵盖RoHS、卤素、镀层、合金(含贵金属)及各种常规材料分析的基本要求。
Using the original refrigeration high-performance Si-PIN detector, highresolution, wide detection range and covers the RoHS,halogen, plating, alloy(including precious metals) and basic requirements of various kinds ofconventional material analysis.
2. 配置□国际最先进的DPP数字多道信号集成处①理器，比普通模拟多道信号处理器性□ 能更佳，尤其在高计数率时有更好的分辨力(如Hg和Cl等)，高达80MHz的数据传输速度使分析时→间更短，测量重复性和长期稳定性更好。
Configuring theinternational most advanced DPP with digital integrated multichannel signalprocessor. Multi-channel signal processor performance is better than thegeneral simulation, especially in the high count rate has better resolution(such as Hg and Cl). The speed of the data transmission up to 80 MHZ make theanalysis time shorter, repeatability better and long-term stability.
3. 内置『高清摄像系统，清⌒ 晰观察样品，准确定位样品测试区域。
Built-inhigh-definition camera system, observethe sample clearly and locate sample test area accurately.
4. 配套
最新的FP测量软件，集成多种谱图处理算法和基体校正算法，有效降低仪器测量中的各种干扰谱峰，使低含量和痕◥量元素的检测结果更加准确，更ぷ加接近真值水平。
Configuring thelatest FP measuring software, integrate variety of spectrogram processingalgorithm and matrix correction algorithm, can reduce the various interferencespectrum peak in the instrumentmeasuring effectively, to make low content and trace elements test results moreaccurate, more close to the true value
技术参数:
Specifications
1. 分析范围:硫（S）－铀（U）
Measurableelements：S-U
2. 含量范围:2ppm-99.99％
Element content: 2ppm-99.99％
3. 测量时间:50-300秒(可调)
Measurement time 50-300s（adjustable）
4. 能量分辨率:149±5eV
Resolution: 149±5eV
5. 高压电源功率∩:50W
High voltage powersupply power：50W
6. 样品腔尺寸:610mm×320mm×100mm
Samplechamber size : 610mm×320mm×100mm
