海绵压缩永久变形试验机
Compression testing machine sponge
产品名称：海绵泡沫压缩永久变形试验机
Product Name: permanent deformation test machine compressed sponge foam
产品型号：YSBX-1
Product type: YSBX-1
执行标准：
The implementation of standards:
GB/T6669-2008/ISO 1856：2000《软质泡沫聚合材料压缩永久变形的测定》
GB/T6669-2008/ISO 1856:2000 "soft foam polymeric materials Determination of compression set"
产品特点：
Product features:
指试样的初始厚度与在规定时间、规定温度下压缩后，经过规定恢复时间的试样最终▽厚度差异。差异的大小与初始厚度有关。
The initial thickness and in the specified time, the prescribed temperature compressed specimen, specimen thickness difference after the prescribed final recovery time. The size difference is related to the initial thickness.
主要用途：
Main uses:
用夹具及定位块将海绵压陷至原始厚度的50%、75%、90%，放置在规定温度的恒温箱内，待至22小时、72小时之后从中取出压缩器，将试样从压缩器中取出放置30min后，测量厚度，计算其变形量。
With a clamp and a positioning block will sponge indentation to the original thickness of 50%, 75%, 90%, were placed at a prescribed temperature in the oven temperature, after up to 22 hours, 72 hours out of the compressor, the sample from the compressor out after insertion of 30min, thickness measurement, calculation of the deformation.
海绵压缩永久变形试验机
主要参数：
The main parameters:
试样尺寸：长宽高=50mmX50mmX25mm
Sample size: =50mmX50mmX25mm long width height
试样数量：一次5个︻试样同时试验
The number of samples: 5 samples at the same time test
压 缩 器：由两块尺寸大于试ζ样的，具有调距和夹持功能的两块平行板组成。
Compressor: consists of two blocks of size larger than the sample, which has adjustable pitch and clamping function of two parallel plates.
玻 璃 片：长宽高=55*55 mm*1.5 mm
The glass sheet: the long high width =55*55 mm*1.5 mm
压缩器定位块数量：
A positioning block number:
定位块尺寸---高度2.5mm 数量：压缩50%---12.5mm 8个
The number of the positioning block size -- height 2.5mm: compressed 50%---12.5mm 8
压缩75%---6.25mm 8个
Compressed 75%---6.25mm 8
压缩90%---2.5mm 8个
Compressed 90%---2.5mm 8
恒温箱控制温度：0-300 ℃
Constant temperature control box temperature: 0300 C
恒温箱控制精度：±1℃
The constant temperature box control precision is ± 1 ℃
恒温箱工作电压：220V
The constant temperature box working voltage: 220V
海绵压缩永久变形试验机
