| Specifications | 594nm single longitudinal mode DPSS laser New | |
| Output power | 25, 50, 100, 200 | |
| Spectral linewidth | <1MHz(< 0.01pm) | |
| Wavelength stability | ±0.02nm, typical 2pm over ±2℃ and 8 hours | |
| Spatial mode | TEM00, M2<1.1 | |
| Beam diameter at aperture | 700μm | |
| Beam divergence(full angle) | <1.2mrad | |
| Noice, 20Hz-20MHz(pk-pk) | <3%, typical <2% | |
| Noice, 20Hz-20MHz(rms) | <0.3, typical <0.2% | |
| Long-term stability(8 hours) | <3% | |
| Beam pointing stability(over 10-40℃) | <10μrad/℃, typical 5μrad/℃ | |
| Polization ratio | > 100:1 | |
| Total system power consumption | <35 W, typical<15 W | |
| Operating temperature | 10-40℃ | |
| Maximum laser head baseplate temp. | 50℃ | |
| Recommended hear sink | 0.5K/W | |
| Laser head dimensions | 103×60×40mm³ | |
| Controller dimensions | 190×72×28mm³ | |
| Communication | RS-232 or USB | |
| Model number structure | CDRH (key-switch for on/off) | OEM (auto-strart mode) |
| Model number structure for RS-232 | wavel-04-01-pwr-300 for CDRH, wavel-04-01-pwr-400 for OEM | |
| Model number structure for USB | wavel-04-01-pwr-700 for CDRH, wavel-04-01-pwr-800 for OEM | |
| Warranty | 24 months | |
| Options & Accessories | Customized controller cable | |
| Communication cable (RS-232/USB) | ||
| Permanent SM/PM fiber pigtailing | ||
| Laser head heatsink | ||
| Mount for external fiber coupling | ||
| Two lasers in one with Dual Combiner | ||
| Integrated optical isolator | ||
