加载中
宏展
65349197 (Q8)
详细说明
重庆宏展四川成都紫外光老化箱
Q8/UV紫外光加速老化试验机中,紫外灯的荧光紫】外等可以再现阳光的影响,冷凝和水喷淋系统可以再现雨水和露水的影响。整个的测试循环中,温度都是可控的。典型的测试循环通常是高温下的紫外光照射和相㊣ 对湿度在100%的黑暗潮湿冷凝周期;典型应用在油漆涂料、汽车工业、塑胶制品、木制品、胶水等。 模拟阳光
阳光中的紫外线是造成大多数材料耐久性能破坏的主要因素。我们使用紫外灯来模拟阳光中@的短波紫△外部分,它产生很少的可见光或红外光谱能量。我们可以根据不同的测试要求选择不同波长的UV紫外灯,因为每种灯在总的紫外线辐照能量和波♀长都不一样【。
我们可以根据不同的测试要求选择不同波长的UV紫外灯,因为每种灯在总的紫外线辐照能量和波长都不@ 一样。
重庆宏展四川成都紫外光老化箱
通常,UV灯管可分为UVA和UVB两种。
Q8/UV灯管
UVA-340灯管:UVA-340 灯管可极好地模拟太阳光中的短波紫外光,即从365 纳米到太阳光截止点 295 纳米的波长范围。
UVB-313灯管:UVB-313 灯管发出的短波紫外光比通常照射在地球表面的太阳紫外线∮强烈,从而可以最大程度的加速材料老化。然而,该灯管可能会对某些材料造成不符合实际的破坏。UVB-313 灯管主要用于质量控制和研究开发,或对耐候性极强的材料运行测试。
UVA-351灯管:模拟透过窗玻璃的阳光紫▃外光,它对于测试室内材料的老化最为有效。
模拟雨露潮湿冷凝环境
在很多户外环境中,材料每■天的潮湿时间可长达12小时。研究表明造成这种户外潮湿的主要因素是露水,而不是雨水。Q8/UV通过独特的冷凝功能来模拟户外的潮湿侵蚀。在试验过程中的冷凝循环中,测试室底部蓄水池中的水被加热以产生热蒸气,并充满整个测试室,热蒸▓汽使测试室内的相对湿度维持在100%,并保持一个相对高温。试样被固定在测试室的侧壁,从而试样的测试面曝露在测试室内的环境○空气中。试样向外的一面暴露在自然环境中具有冷却效果,导致试样内外表面具备温差,这一温差的出现导致试样在整个冷凝循环过程中,其测试面始终〗有冷凝生成的液态水。
由于户外曝晒接触潮湿的时间每天可以长达十几小时,因此典型的冷凝循环一般持续几个小时。Q8/UV提供两种潮湿模拟方法。应用最多的◣是冷凝方法,它是模拟户外潮湿侵蚀的最好方法。所有的Q8/UV型号都可运行冷凝循环。因为有些应用条件也要求使用水喷淋以达到↑实际的效果■,所以有些Q8/UV型号既可运行冷凝循环又可运行水喷淋循环。
重庆宏展四川成都紫外光老化箱
纺织品
|
|
-
AATCC Test
Method 186, Weather Resistance: UV Light and Moisture Exposure
-
ACFFA Test
Method for Colorfastness of Vinyl Coated Polyester Fabrics
|
印刷油墨
|
|
-
ASTM F1945,
Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting
|
橡胶
|
|
?
GB/T 16585,硫化橡胶人工气候老化(荧光紫外ㄨ灯)试验方法
|
|
电∞工电子产品
|
|
? GB/T 19394,光伏(PV)组件紫外试验
|
type the link here
|
粘合剂和密封剂
|
|
-
ASTM C
1501, Standard Test Method For Color Stability of Building Construction
Sealants as Determined byLaboratory Accelerated Weathering Procedures
-
ASTM
C-1184, Specification for Structural Silicone Sealants
-
ASTM
C-1442, Standard Practice for Conducting Tests on Sealants Using
Artificial Weathering Apparatus
-
ASTM D-904,
Standard Practice for Exposure of Adhesive Specimens to Artificial Light
-
ASTM
D-5215, Standard Test Method for Instrumental Evaluation of Staining of
Vinyl Flooring by Adhesives
-
American
Plywood Assn., Approval Procedures for Synthetic Patching Materials,
Section 6
-
Spanish
Std, UNE 104-281-88 Accelerated Testing of Paints and Adhesives with
Fluorescent UV Lamps
|
塑料
|
|
-
ISO 4892
Plastics - Methods of Exposure to Laboratory Light Sources-Part 3:
Fluorescent UV Lamps
-
DIN 53 384,
Testing of plastics, Artificial Weathering and Exposure to Artificial
Light
-
Spanish
Standard UNE 53.104 (Stability of Plastics Materials Exposed to
Simulated Sunlight)
-
Israeli
Standard No. 385, Plastic Windows www.hongzhangroup.com
-
JIS K 7350,
Plastics - Methods of Exposure to Laboratory Light Sources-Part 3:
Fluorescent UV Lamps
-
ASTM
D-1248, Standard Specification for Polyethylene Plastics Extrusion
Materials for Wire and Cable
-
ASTM
D-4329, Standard Practice for Light/Water Exposure of Plastics
-
ASTM
D-4674, Test Method for Accelerated Testing for Color Stability of
Plastics Exposed to Indoor
Fluorescent Lighting and Window-Filtered Daylight
-
ASTM
D-5208, Standard Practice for Exposure of Photodegradable Plastics
-
ASTM
D-6662, Standard Specification for Plastic Lumber Decking Boards
-
ANSI C57.12.28
Specification for Accelerated Weathering of Padmounted Equipment
Enclosure Integrity
-
ANSI, A14.5
Specification for Accelerated Weathering of Portable Reinforced Plastic
Ladders
-
Edison Electrical Inst. Specification for Accelerated
Weathering of Padmounted Equip. Enclosure Integrity
-
Wisconsin Electric Power Specification for Polyethylene
Signs
-
GB/T 18950,橡胶和〇塑料软管 静态下耐紫外线性能测定
-
GB/T
16422.3,塑料实验室光源暴露试验方法 第3部分:荧光紫外灯↓
|
Best regards!
广东宏展科技有限公司-西南办事处
Guangdong Hongzhan Technology Co.,Ltd
秦 玉 玲 qin yuling
Phone:135 9430
9859
Tel:
Fax:
E-mail:
QQ:
GB/T 16585,硫化橡胶人工气候老化(荧光紫外灯)试验方法
型号 Model
|
Q8/UV3
|
Q8/UV2
|
Q8/UV1
|
UV 照射 Exposure
|
●
|
●
|
●
|
冷凝 Condensation
|
●
|
●
|
●
|
光照控制 Irradiancs Control
|
●
|
●
|
|
可调光线 Adjustable irradiance
|
●
|
●
|
|
喷水 Water Spray
|
●
|
|
|
热冲击 Thermal Shock
|
●
|
|
|
自动侦路 Self-diagnostics
|
●
|
●
|
●
|
灯泡数量 Lamp Qty
|
紫外⌒线灯管 8 支,备品 4 支 Ultravloiet lamp 6pcs, spares 4 pcs (美国Q-LAB,Q-Panel,美国ATLAS,UVA340,UVB313,UVC351)
|