体积、表面电阻率测试仪符合标准：
Volume and surface resistivity tester accord with a standard:
GB/T 1410-2006 《 固体绝缘材料体积电阻率和表面电阻率试验方法》
GB/T 1410-2006 "solid insulation material volume resistivity and surface resistivity test method,
ASTM D257-99 《绝缘材料的直流电阻或电导试验方法》
ASTM D257-99 "insulation material dc resistance or conductivity test method,
GB/T 2439-2001《硫化橡胶或热塑性橡ζ胶 导电性能︽和耗散性能电阻率的测定》
GB/T 2439-2001 "vulcanized rubber and thermoplastic rubber conductive performance and dissipation performance resistivity measurement"
GB/T 10581-2006 《绝缘材料在高温下电阻和电阻率的试验方法》
GB/T 10581-2006 "insulation materials under high temperature resistance and resistivity test method,
GB/T 1692-2008 《硫化橡胶绝缘电阻率的测定》
GB/T 1692-2008 "rubber insulation resistivity measurement"
GB/T 12703.4-2010 《纺织品 静电性能的ζ 评定 第４部分：电阻率》
GB/T 12703.4-2010 "textile static performance evaluation part 4: resistivity"
GB/T 10064-2006《测定固体绝缘材料绝缘电阻的试验方法》
GB/T 10064-2006 "determination of solid insulation insulation resistance of the test method,
HEST200 型硫化橡』胶表面、体积电阻率测定仪完○全符合并优于国家标准G GB/T 2439-2001《硫化橡胶或热塑性橡胶 导电性能和耗散性能电阻率的测定》GB/T 10581-2006 《绝缘材料在高温下电阻和电阻率的试验方法》
HEST200 type rubber surface, volume resistivity meter fully comply with and superior to the national standard G GB/T 2439-2001 "vulcanized rubber and thermoplastic rubber conductive performance and dissipation performance resistivity measurement of GB/T 10581-2006" insulation materials under high temperature resistance and resistivity test method,
等标准的要求。其准确度优于国家标准要求的几倍甚至10 倍以上(国家标准GB/T1410-2006《固体绝缘材料体积电阻率和表面电阻率试验方法》对精确度的规定为低于1010Ω为±10%, 更高电阻时为±20%。)。本仪器既可╲测量高电阻，又可测微电流。采用了新型集成电路以及我单位的专利技术。测量精度达到3‰。同时仪器体积小、重量轻、本仪器具有精度高、显示迅速、性好稳定、读◆数方便等优点。数字液晶直接显示电阻值和电流。量程从0.01×104Ω ～1×1018 Ω，是目前国内测量范围最宽，准确度最高的数显式绝缘材料电阻率测量仪器。电流←测量范围为2×10-4 ～1×10-16Ａ。测试电压为10/50/100/250/500/1000V 任意可调。适用于防静电产品如防静电鞋、防静电塑料橡胶制品、计算机房防静电活动地板等电阻值的检验以及绝缘材料和电子电器产品的绝缘电阻测量。
The requirements of the standards. Its accuracy is better than the national standard for several times and even more than ten times (national standard GB/T1410-2006 "solid insulation material volume resistivity and surface resistivity test method" on the provisions of accuracy for less than 1010 Ω for plus or minus 10%, higher resistance as a plus or minus 20%). . The instrument can measure high resistance, and measurable micro electric current. Adopts the new type of integrated circuit and I units of patent technology. Measurement accuracy reached 3 ‰. At the same time instrument small volume, light weight, high precision, this instrument has shown quickly, sex good stability, reading convenience etc. A digital LCD display directly resistance and current. Range from 0.01 x 104 Ω ~ 1 x 1018 Ω, is the present domestic the most wide measuring range, accuracy of the highest digital display type insulation resistivity measuring instrument. Current measuring range is 2 x 10-4 ~ 1 x 10-16 a. The test voltage for 10/50/100/250/500/1000 v arbitrary adjustable. Suitable for anti-static products such as anti-static shoes, antistatic plastic rubber products, computer room activities of anti-static floor resistance test and the insulation materials and electronic products insulation resistance measurements.
硫化橡胶表面、体积电阻率测定仪技术指标
Rubber surface, volume resistivity meter technical indicators
1．电阻测量范围： 0.01×104Ω ～1×1018Ω。
1. The resistance measurement range: 0.01 x 104 Ω ~ 1 x 1018 Ω.
2．电流测量范围: 2×10-4A～1×10-16A
2. Current measuring range: 2 x 10-4 a ~ 1 x 10-16 a
3． 显 示 方 式：数字液晶显示
3. Show and square type: digital LCD display
4． 内置测试电压：10V、50V、100V、250、500、1000V
4. The built-in test voltage: 10 v, fifty v, 100 v, 250, 500, 1000 v
5． 基本准确度→：3‰
5. Basic accuracy: 3 ‰
6．使用环境: 温度：0℃～40℃，相对湿度<80%
6. Use environment: temperature: 0 ℃ ~ and ℃, relative humidity < 80%
7． 机内测试电压: 10/50/100/250/500/1000V 任意切换
7. Built-in test voltage: 10/50/100/250/500/1000 v arbitrary switching
8．供电形式: AC 220V，50HZ，功耗约5W
8. Power supply form: AC 220 v, fifty hz, power consumption about 5 w
9． 仪器尺寸: 285ｍｍ× 245ｍｍ× 120 mm
9. Instrument size: 285 mm x 245 mm x 120 mm
10．质量: 约2.8KG
Quality: about 2.8 KG
典型应用
Typical application
1 硫化橡胶体积、表面电阻率测定
1 vulcanized rubber volume and surface resistivity measurement
2．测量防静电鞋、导电鞋的电阻值
2. Measuring anti-static shoes, conductive shoes resistance
3、测量防静电材料的电阻及电阻率
3, measuring antistatic material resistance and resistance rate
4、测量计算机房用活动地板的系统电阻值
4, measuring computer room with activities of the floor system resistance
5、测量绝缘材料电阻(率)
5, measuring insulation resistance (rate)
6、光电二极管暗电流测量
6, photoelectric diode dark current measurement
7、物理,光学和材料研究
7, physics, optics and material research
8、高分子材料表面体积电阻率测定
8, polymer materials surface volume resistivity measurement
标准配置：
Standard configuration:
1、测试仪器：1 台
1, test instrument: 1
2、电源线： 1 条
2, the power cord: 1
3、测量线： 3 根（屏蔽线、测试接线、接地线）
3, measuring line: 3 root (shielded cable, test wiring and grounding line)
4、屏蔽箱
4, shielding box
5、三电极
5, three electrode
6、合格证
6, certificate
7、说明书
7, specification
