性能特点

• kHz脉冲重复频率下的高能量
• 半导体泵浦全固态设计
• Air cooled – external water supply is not required
• 即开即用操作
• 运行维护成本低
• Optional Low jitter SYNC OUT pulse for streak camera triggering
• PC connection with LabView drivers
• Remote control keypad
• 532 / 355 / 266 / 213 nm wavelengths available

   

相关应用

• OPG/OPA pumping
• Time resolved fluorescence, absorption, pump-probe spectroscopy
• Micromachining
• Laser tweezers 
• Characterization of bulk and nonlinear optical materials 
• Your application welcome…

 Short pulse duration, high energy, up to 2 kHz repetition rate and excellent pulse-to-pulse stability makes PL2200 series diode pumped picosecond lasers an first choice for many applications, like material processing, laser spectroscopy, optical parametric generator pumping and other tasks. 

• Model PL2210 delivers less than 20 ps pulse duration at up to 2 KHz repetition rate
• Model PL2210B provides pulses with up to 2.5 mJ energy at 1 kHz at slightly longer pulse duration of 80 ps

Build-in harmonic generators

Angle-tuned LBO and KDP crystals mounted in thermostabilised ovens are used for second, third and fourth harmonic generation. Harmonics separators ensure high spectral purity of each harmonic directed to different output port.

Simple and convenient laser control

For customer convenience the laser is controlled through its RS 232 type PC interface with LabView drivers (included) or a user-friendly remote control pad. The remote pad allows easy control of all the parameters and features a backlit display that is easy to read even while wearing laser safety eyewear.

Build in energy monitors ensure easy operation control. Data from the energy monitor can be seen on the remote keypad or PC monitor via the LabView drivers. LabView drivers, supplied together with the laser, enables long term monitoring of the output energy.

Model	PL2210	PL2210A	PL2210B
Output energy, mJ
at 1064 nm	0.4	0.9	2.5
at 532 nm2)	0.2	0.45	1.3
at 355 nm3)	0.11	0.3	0.8
at 266 nm4)	0.05	0.15	0.5
Pulse energy stability (Std. Dev), % 5)
at 1064 nm	1
at 532 nm	2
at 355 nm	3
at 266 nm	4
Pulse duration (FWHM), ps 6)	<25	<25	<80
Pulse duration stability, ±% 7)	3	3	5
Pulse repetition rate, Hz 8)	1000 or 2000	1000 or 2000	1000
Triggering mode	Internal/External
Typical SYNC OUT pulse delay, ns9)	450
SYNC OUT pulse Jitter (Std. Dev), ns 10)	<0.25
Spatial mode11)	TEM00
Beam divergence, mrad 12)	<1.6
Typical beam diameter, mm 13)	~3
Beam pointing stability, μrad 14)	<30
Contrast ratio (to residual post-pulse)	>200:1
Polarization	Linear, >100:1

Physical characteristics 

Laser head size (W x L x H), mm 15)	446 x 1220 x 260
Power supply size (W x L x H), mm	340 x 365 x 290	472x460 x 290	472 x 460 x 290

Operating requirements

Model	PL2210	PL2210A	PL2210B
Water service	Not required, air cooled
Relative Humidity (non conensing), %	10-80
Operating ambient temperature, °C	22 ± 2
Mains requirements	100-240 VAC, single phase, 47-63 Hz
Power consumption	<0.5	<1	<1