MEDTHERM 64 Series Gardon gage offer dependable direct measurement of heat transfer rates in a variety of applications due to careful design, rugged quality construction and versatile mounting configurations. Each transducer will provide a self-generated 10-millivolts (nominal) output at the design Gardon gage. Continuous readings from zero to 150% design heat flux are made with infinite resolution. The linear transducer output is directly proportional to the net heat transfer rate absorbed by the sensor.
64 Series transducers have for almost forty years met thousands of application challenges in ground and flight aerospace testing, fire testing, flammability heat flux standards, heat transfer research, materials development, and furnace development.
CALIBRATION
Each gardon gage is provided with a certified comparison calibration per written procedures to ANSI/NCSL Z540-1, ISO 10012-1, and ISO/IEC 17025. Calibrations are traceable through temperature standards and electrical standards to the National Institute of Standards and Technology (NIST). Calibrations are radiant calibrations, referenced both to blackbody simulators as source standards and to a set of MEDTHERM Kendall Absolute
Cavity (ECR) Radiometers as detector standards. Special calibrations are also available.
Gardon gage FEATURES
* LINEAR OUTPUT
* OUTPUT PROPORTIONAL TO HEAT TRANSFER RATE
* ACCURATE, RUGGED, RELIABLE
* CONVENIENT MOUNTING
* UNCOOLED, WATER COOLED, GAS PURGED MODELS
* RADIOMETER AND LIMITED VIEW ACCESSORIES
* MEASURE TOTAL HEAT FLUX
* MEASURE RADIANT HEAT FLUX
Gardon gage standard in the ranges from 5 to 4000
Medtherm戈登热流≡传感器64系列的结构：
准确、坚固、可靠的圆箔◣式和塞式传感器。
OFHC铜质体，确保长传感器寿命和信号稳定性。
不锈钢法兰（如配备），便于安装。
采用焊接接头、铜丝编织屏蔽绞线、Teflon绝缘材料以及应力释放，防止受损和寄生信号，从而确保信号完整性。
Medtherm戈登热①流传感器64系列的规格ω
标准量程：4000，3000，2500，2000，1500，1000，500，250，200，100，50，30,25，20，15，10，5，2，1，0.5，0.2 Btu/(ft2.s)。（可定制量程）
输出信号：线性输出，10 mv标称@全量程。
最高容许传感器体温ω 度：400 °F。
过量程能力：150%量程，2-1000 Btu/(ft2.s)时。
最大非线性：±2%全量程。
重复性：±1/2%
校准扩展不确定◎度：量程~250Btu/(ft2.s)时为±3%，包含因子k=2（对于约95%的置信水平）。
